email:- © Simon Barber and Wendy Barber 2017-20

Fitting to a Van

Fitting of a pair of Vangarde plates is very straightforward, and should normally take around 30 - 45 minutes for

someone with basic technical skills.

The following tools will be required:-

Pencil Masking tape Centre punch / hammer (optional) Power drill 3mm or 4mm drill bit for pilot holes 11mm drill bit drill bit depth collar/s (optional) M8 Nutsert pulling tool Superglue or threadlock

To fit a Vangarde plate in most situations, all that is required is to drill two holes into the inside top of

of the vans side-door, and insert two nutserts. The Vangarde is then affixed to these using the included

quick-release Thumbturns. Some situations may require the use of the extender plates, which simply involves

fitting a further two nutserts (this time to the extender plate itself). Each plate now incorporates a template.

Full instructions may be downloaded here:-

View the instructional fitting video below.

Shipping £6.50 on all orders

For those that would prefer to have the Vangarde van security system professionally installed to their van,

please see our Fitters page, which details those offering Vangarde supply and fitting services around the UK.